Yash High Voltage Ltd

Leading supplier of HV bushings for transformers is Yash Highvoltage. We provide a comprehensive selection of products to satisfy the needs of our clients, and our bushings are developed and produced to the highest standards.

Our HV bushings are constructed from premium components and are intended to endure the punishing conditions present in industrial settings such as power plants. We also provide a range of features that improve the dependability and effectiveness of our bushings, including:

Partial discharge free design

Low dissipation factor

Excellent thermal performance

High seismic and short circuit load withstand capacity

Yash Highvoltage is dedicated to offering the best goods and services to its clients. We provide a variety of assistance alternatives, such as:

• Technical support
• Warranty and repair services
• Training and education

Yash Highvoltage is the company to choose if you need a dependable and high-quality HV bushing for your transformer. To find out more about our goods and services, get in touch with us immediately.

Additional advantages of using Yash Highvoltage HV bushings include the following:

Enhanced safety

Our bushings are made to stop partial discharges, which can cause explosions and fires.

decreased downtime

Because our bushings are more dependable and effective than conventional bushings, uptime and downtime can both be improved.

Enhanced effectiveness

Our bushings can help your transformer run more efficiently, which can lower your energy costs.

Yash Highvoltage is the company to choose if you need a high-quality, dependable, and secure HV bushing for your transformer. To find out more about our goods and services, get in touch with us immediately.

An insulating device called a transformer bushing makes it easier for an energised conductor to pass through the grounded tank of the transformer. A bushing may be designed with a provision for a separate conductor to be drawn through its centre, sometimes known as a draw-lead or draw-rod bushing, or it may be made with the conductor already built in, in which case it is known as a bottom-connected bushing.

The two main bushing construction types are capacitance-graded (also known as condenser type) and solid or bulk type. The bushings used for a transformer’s low voltage winding(s) are frequently of the solid kind with an insulator made of porcelain or epoxy. The high voltage winding of a transformer uses bushings that have been capacitance-graded for higher voltage ratings.

In contrast to a solid type construction, a capacitance-graded transformer bushing has conducting layers put into the insulation separating the centre conductor from the bushing’s insulator (housing) at predefined radial intervals. These numerous conductive inserts produce capacitive components that connect the bushing’s centre conductor to ground. To ensure a more even distribution of voltage across the surrounding insulation system in the bushing, they are designed to manage the voltage field around the centre conductor.

Between the conductor and the insulator in solid type bushings, electrical grade mineral oil is frequently utilised. This oil may be contained within the bushing or shared with the transformer. Oil-impregnated paper (OIP), resin-impregnated paper (RIP), and resin bonded paper (RBP) are common types of insulation used in capacitance-graded bushings. Mineral oil, which is often integrated into the bushing, is also used in capacitance-graded bushings.

Transformer asset owners are very interested in the health of the transformer bushings because bushing failures are frequently cited as one of the leading causes of transformer failures. The most common bushing failure modes are moisture infiltration, electrical flashover, lightning strike, short-circuited capacitance-graded layer(s), incorrect application of the bushing, corrosive sulphur, broken connection between ground sleeve and flange, and broken tap connection. The integrity of the bushings is determined by the electrical field tests that are performed after that.

In order to insulate and safeguard electrical wires as they pass through an enclosure, such as a transformer or switchgear, an electrical bushing is a device. Between the conductor and the grounded enclosure, it acts as a barrier to stop electrical arcing and preserve the integrity of the insulation.

A bushing’s principal job is to give the electrical conductor a controlled, secure passageway while preserving insulation and preventing current leakage. Additionally, it aids in stabilising and anchoring the conductor.

In bushing construction, the conductor is usually encased in an insulating substance like porcelain, polymer, or composite. In order to prevent electrical breakdown, the conductor, which is frequently constructed of copper or aluminium, extends through the bushing with the correct insulation and spacing.

Bushings come in a variety of forms, including oil-filled, gas-filled, and dry versions. Insulating oil is contained in oil-filled bushings to improve insulation and dissipate heat. Sulphur hexafluoride (SF6) is frequently used to fill gas-filled bushings, which offer great insulating strength in a small package. Dry-type bushings are appropriate for applications where oil or gas insulation is not sought since they use solid insulating materials.

Transformer bushings, which connect the internal windings to the external electrical system, are made specifically for transformers. They maintain electrical isolation while allowing electrical power to flow into or out of the transformer.

In high-voltage switchgear equipment, switchgear bushings are used to join the conductors of the switchgear to outside circuits. They support the conductors and offer electrical insulation, providing safe and dependable operation.

Bushing design takes into account factors such as voltage rating, current carrying capacity, insulation coordination, environmental conditions, and mechanical strength. They are crucial components in electrical systems, ensuring the safe and efficient transmission and distribution of electrical power.

Transformer bushings are vital parts that are essential to a transformer’s operation. They provide as a safe and insulated link between the external wires and the transformer.

Transformer bushings’ main purpose is to act as an electrical insulator between a transformer’s grounded components and its energised components. This is accomplished by employing premium insulating materials that can tolerate high voltages and temperatures, such as silicone, epoxy, or porcelain.

Transformer bushings support the transformer mechanically in addition to offering insulation. They are made to withstand both the weight of the transformer and any potential external stresses, such wind or earthquakes.

The voltage and application requirements of the transformer determine the shape and size of the transformer bushings. Oil-impregnated paper (OIP), resin-impregnated paper (RIP), and gas-filled (GF) bushings are a few examples of common transformer bushing types.

For transformer bushings to continue working and to avoid future failures, routine maintenance and inspection are essential. Faulty bushings can endanger crew safety and cause significant harm to the transformer and its surroundings.

In order to ensure the safe and effective operation of transformers, transformer bushings are essential. They aid in extending the lifespan of transformers and avoiding expensive downtime by offering mechanical support and electrical insulation.

Leading supplier of premium Resin Impregnated Paper (RIP) bushings for transformers is Yash Highvoltage. We have established ourselves as a reputable name in the high voltage engineering field after more than 25 years in the business.

Our RIP bushings are created and manufactured to satisfy the unique needs of our clients. We create RIP bushings that are effective, resilient, and secure to use by utilising cutting-edge technology and machinery. Our RIP bushings are suited for a multitude of applications because they come in a wide range of sizes and styles.

We at Yash Highvoltage are dedicated to provide the top goods and services to our clients. To give our clients the very best experience, we always work to enhance our goods and procedures. Our team of skilled engineers and technicians works closely with our clients to comprehend their demands and create solutions that are specifically tailored to fulfil those goals.

For the greatest levels of quality and safety, our RIP bushings undergo extensive testing. We are committed to offering products that are durable, dependable, and effective to our consumers.

Look no further than Yash Highvoltage if you need a high-quality RIP bushing manufacturer for your transformer. To speak with one of our experts and learn more about our RIP bushings, get in touch with us right away.

The high-voltage winding of a transformer is connected to the external electrical system by transformer bushings, which are an essential part of transformers. Bushings, however, can degrade with time for a number of causes, just like any other component. We will talk about a few of the main reasons why transformer bushings fail in this article.

1. Age: Age is one of the most frequent reasons why transformer bushings fail. The insulation material used in the bushing may deteriorate over time as a result of things like exposure to extreme heat, moisture, and pollutants. The bushing may consequently grow cracks, leaks, or other flaws that can result in electrical failure.
2. Overloading: Overloading or overcurrent situations can cause transformer bushings to break. The insulation material may deteriorate or even melt when the current through the bushing is greater than its rated capacity, which might result in a short circuit.
3. Contamination: Contamination, which can be brought on by things like dust, moisture, or oil leaks, can also cause bushings to fail. The insulation material may deteriorate due to contamination, resulting in a short circuit or other electrical failure.
4. Mechanical damage: Transformer bushings may also degrade as a result of impact or vibration-related mechanical harm. A damaged bushing may develop cracks, leaks, or other flaws that could result in an electrical failure.
5. Improper installation or maintenance: Finally, poor installation or maintenance can cause transformer bushings to malfunction. The bushing can cause electrical failure or other problems if it is not installed or maintained properly.

In conclusion, a number of factors, including as ageing, overloading, contamination, mechanical damage, and incorrect installation or maintenance, can cause transformer bushings to fail. Regular inspection and maintenance helps guarantee the transformer operates dependably by assisting in the early detection of possible faults.